Hi friends, in this blog we are going to discuss about ETP Plant process and its advantages. Now a days, all the industries generate effluent either it is a textile, chemical or pharmaceutical company. And these effluents can be harmful as it may contain several types of toxic and non-toxic chemical; thus, water containing effluent can not be released without treatment. And to eliminate effluent from the industrial water, you need the best wastewater treatment.
An effluent treatment plant is used to eliminate or remove the high amount of organic compound, debris, dirt, grit, toxic, and non-toxic material, polymers, and many others. The ETP plant uses evaporation and drying methods and other advance technology such as centrifuging, filtration, and much different technique to eliminate the various toxic and non-toxic pollutant present in the water.
Effluent Treatment Process
The effluent treatment plant process are listed below these are
1. Primary Filtration
It is the first stage of the effluent treatment plant. In this process effluent collected from various industries undergoes filtration process. In this process, mainly solids waste particles are removed.
2. Cooling And Mixing
After the primary filtration, the water enters into the cooling and mixing chamber where effluent of various industries are appropriately mixed. Once the mixing process gets completed, the water containing effluent is allowed to cool down. And the cooling process can be achieved with the help of a fan.
3. Neutralization Tank
Now with the help of the pump, the water containing effluent of various industries enters into the neutralization tank. In the neutralization tank, the acid or alkali is mixed to neutralize the effluent. The pH meter is used in the neutralization tank to check the pH of the water before transferring the effluent into the coagulant bath.
4. Coagulant Bath
In this process, a coagulant is added with the effluent. Coagulant plays a vital role in the wastewater treatment process. When the coagulant attached with the effluent, then its size increases. As a result, the effluent gets to settle down at the bottom.
5. Settling Tank
In this tank, the effluent is separated from the water because the effluent set settles down at the bottom on the container. Now the water is ready to discharge. These days the effluent treatment plant is essential for almost all industries because due to environment protection, the Industrial water should maintain the various standard.
What Are The Advantages Of Effluent Treatment?
ETP plant plays a vital role in industrial wastewater treatment as well as sewage generated from the household. The effluent treatment plant is essential for both small-sized and medium-sized industries because it helps them in disposing of the effluent generated during their facilities. The Effluent treatment system has various benefits some of them are
1. Help To Generate Clean Reusable Water
ETP plant generated by the top and reputed organization ensure that it will bring clean and safe water. Before the introduction of this electronic device, hardly few people were aware that the impure water could be reused. Now due to the advancement in the technology, the ETP plants are based on modern and advanced technology which ensure that an ETP plant will eliminate entire toxin from water to generate safe and clean water.
2. Save Your Money
To protect the environment, no industries can drain off their wastewater until it is entirely contamination free. The wastewater of various industries can lead to different kinds of health issues. Thus there are several standards, set by the government, and all the industries should match those standards before they drain off the water. Therefore before the introduction of ETP plant, it was costly but due now a day the ETP plant cost comparatively less.
3. Save Water
An effluent treatment plant is based on advanced technology which can eliminate all kinds of contamination present in the water. As a result, they can be reused. Thus it avoids the wastage of water. Along with that if you are concerned about the carbon footprint, then again ETP plant can be the best option for you.
